Belinka Oil Decking Belinka oil decking is used for the protection and maintenance of exterior walkable wooden surfaces and garden furniture. It is used to protect surfaces made of resistant types of wood (larch, oak, chestnut and tropical wood, such as teak and bangkirai). for protection and maintenance of exterior walkable wooden surfaces and garden furniture contains UV filters and UV absorbers increases the resistance to weathering repels water and dirt available in five carefully selected colour shades The oil penetrates deep into the wood, revives it, colours it and enhances its natural structure. The shade and final appearance of the oiled surface depend on the type of wood the oil is applied to. An oiled surface repels water and dirt and is easier to clean. As it does not form a film on the surface, there is no bubbling or peeling off of the film as a result of shrinkage or swelling of wood. It contains UV filters and UV absorbers which increase the resistance to weathering. Belinka oils are made from natural ingredients and are harmless to health and environmentally friendly. Warning Oil soaked cloths must be soaked in water or burnt after use, otherwise spontaneous combustion may occur. Share Colour chart (Colour shades are for information purposes only!) UseTechnical data Informative calculation of consumption Material safety data sheets Technical documentation Before application, the wood must be dry, free of impurities and grease, finely sanded and free of dust. Mix the oil well before use. The consumption depends on the type of wood, its preliminary treatment and the method of application. Wood is well-protected when it no longer absorbs the oil, so at least two layers of oil should be applied in 24-hour intervals when protecting the surface for the first time. It takes several days for the deeper layers to dry completely, so we advise against exposing wood to significant loads during this time. Protective clothing should be worn when using this product. We recommend regularly checking the condition of oiled and weather exposed elements, which should be treated with the same product when necessary. Mandatory treatment intervals depend on the type of wood, mechanical load and exposure to humidity. We recommend refreshing the surface at least once a year. Composition: modified vegetable oils and waxes, pigments, UV absorbers and additives. Consumption: 15–30 m2 with 1 l of oil, depending on the type, absorbency and pretreatment of wood. Drying: 24 hours (under normal conditions, T = 20 °C, relative air humidity 65 %). At lower temperatures or higher air humidity the drying time is extended. Cleaning tools: with water and detergent or white spirit. Storage: in the originally sealed packaging at a temperature between 5 °C and 30°C. Flash point: over 65 °C. Packaging units: 0.75 l and 2.5 l Surface area 0.065 m2 Consumption l in one application The calculation is informative. Material safety data sheets Technical data Use Technical data Informative calculation of consumption Material safety data sheets Technical documentation Before application, the wood must be dry, free of impurities and grease, finely sanded and free of dust. Mix the oil well before use. The consumption depends on the type of wood, its preliminary treatment and the method of application. Wood is well-protected when it no longer absorbs the oil, so at least two layers of oil should be applied in 24-hour intervals when protecting the surface for the first time. It takes several days for the deeper layers to dry completely, so we advise against exposing wood to significant loads during this time. Protective clothing should be worn when using this product. We recommend regularly checking the condition of oiled and weather exposed elements, which should be treated with the same product when necessary. Mandatory treatment intervals depend on the type of wood, mechanical load and exposure to humidity. We recommend refreshing the surface at least once a year. Composition: modified vegetable oils and waxes, pigments, UV absorbers and additives. Consumption: 15–30 m2 with 1 l of oil, depending on the type, absorbency and pretreatment of wood. Drying: 24 hours (under normal conditions, T = 20 °C, relative air humidity 65 %). At lower temperatures or higher air humidity the drying time is extended. Cleaning tools: with water and detergent or white spirit. Storage: in the originally sealed packaging at a temperature between 5 °C and 30°C. Flash point: over 65 °C. Packaging units: 0.75 l and 2.5 l Surface area 0.065 m2 Consumption l in one application The calculation is informative. Material safety data sheets Technical data Other products in this category Belinka Oil Paraffin colorless impregnation for the protection of wooden elements in saunas does not dry, it is colorless, odourless and flavourless ... Belinka Oil Tung colorless bio impregnation for the protection of weather exposed wooden elements, and of wood on yachts or other vessels a well treated wooden surface is water-repellent, has a silky gloss and does not yellow over time ... Belinka Oil Food Contact colorless bio impregnation for the protection and maintenance of wooden surfaces that come into contact with food the impregnation is absorbed deeply into the wood, and it makes the surface water-repellent ... Belinka Oil Interier colorless impregnation for the protection and maintenance of interior wooden surfaces forms a thin film on the surface that gives quality protection and a pleasant smooth surface an oiled surface is water repellent and dries quickly suitable for coating children’s toys ... Belinka Oil Exterier colorless bio impregnation decking, garden furniture, cladding, joinery contains agents that slow down mold development has a citrusy scent and dries quickly ...