Belfresh Effective agent that removes the greyness from weather-exposed wood that has turned grey Helps to emphasize the natural colour of walkable surfaces, wall cladding and garden furniture Suitable for refreshing more resistant types of wood Belfresh is an effective agent that removes the greyness from weather-exposed wood that has turned grey. It helps to emphasize the natural colour of walkable surfaces, wall cladding and garden furniture. It is suitable for refreshing more resistant types of wood (larch, oak, acacia, chestnut and tropical wood, such as teak and bangkirai), that have not been oiled for a long time or are untreated. It is not suitable for use on surfaces protected with woodstain or enamel. The effect depends on the type of wood. Thoroughly dry the treated wood, sand it and protect it with Belinka Oil Decking or Belinka Oil Exterier. For surfaces exposed to weather conditions, we recommend prior protection through impregnation, for example with Base. Use plastic tools that can be cleaned with water. Share UseTechnical data Informative calculation of consumption Material safety data sheets Technical documentation Before use, put on protective clothing, rubber gloves and protective goggles. Before use, protect plants, marble and metal parts that are not corrosion-resistant. Based on the greyness of the surface, the agent can be used undiluted or thinned with water (max. 1 part agent to 4 parts water). Wood is to be thoroughly cleaned and moistened with water, which is to be followed by the application of Belfresh with a brush, roller or scrub brush. Do not use metal scourers or wire sponges. Apply abundantly and leave for 10 to 20 minutes. Then clean the wood with a a nonmetal hard-bristle brush and thoroughly rinse with water to completely remove the agent. The product must not dry up on the wood, so clean large surfaces in steps. The product is to be used at a temperature above +8 °C. Do not apply in direct sunlight. If the surface is very grey, repeat the process. Consumption depends on the greyness of the surface; if used as a concentrated product, it can be used to clean up to 8 m2. Surface area m2 Consumption l in one application The calculation is informative. Material safety data sheets Technical data Use Technical data Informative calculation of consumption Material safety data sheets Technical documentation Before use, put on protective clothing, rubber gloves and protective goggles. Before use, protect plants, marble and metal parts that are not corrosion-resistant. Based on the greyness of the surface, the agent can be used undiluted or thinned with water (max. 1 part agent to 4 parts water). Wood is to be thoroughly cleaned and moistened with water, which is to be followed by the application of Belfresh with a brush, roller or scrub brush. Do not use metal scourers or wire sponges. Apply abundantly and leave for 10 to 20 minutes. Then clean the wood with a a nonmetal hard-bristle brush and thoroughly rinse with water to completely remove the agent. The product must not dry up on the wood, so clean large surfaces in steps. The product is to be used at a temperature above +8 °C. Do not apply in direct sunlight. If the surface is very grey, repeat the process. Consumption depends on the greyness of the surface; if used as a concentrated product, it can be used to clean up to 8 m2. Surface area m2 Consumption l in one application The calculation is informative. Material safety data sheets Technical data Other products in this category Belprotect Colourless coating used to improve the resistance of the coated surface Contains additives that protect the film against mould and algae With Belprotect, the coated surface retains its pre-coat colour The final appearance of the surface is glossy ... Algid Agent used to destroy green algae Colourless concentrated liquid Intended for professional and general use ... Belcare Colourless water-based product Fills up the micropores in the coating Improves water-resistance of the surface Refreshes the colour and extends the lifespan of the coating ...
